Most of our standard range of mesh panel stands can be custom sized with a minimum production quantity stated on the relevant product. A prototype can be built for a small fee and a production batch of 25 or more units can be painted any colour.
Floor standing mesh panel stand, complete with feet and curved header frame.
The display area is 22" wide by 60" high. The assembled stand dimensions are 600mm wide by 1855mm high by 432mm deep.
Custom sizes available with a minimum of 25 units
A versatile display for many different products. The stand comes as one large flat panel with detachable feet. There are two channels at the top of the stand to allow a head board to be used. Also two holes in the framework allow this stand to be screwed to a wall. The mesh/grid is 2" square.
The size of the stand is 550mm wide, 1870mm high (including the header channels) and 355mm deep. The header card will need to be 500mm wide and ideally 150mm tall.
If hooks are required use J9 or J10. Other colours are available on quantities of 25 or more. For bulk purchase please enquire for prices.
5 sided rotary mesh panel unit that rotates. Each side has a display area or 48" by 8" (1220mm x 204mm) giving a total display area of 48" by 40". All our mesh panel hooks fit this stand.
Four sided rotary stand with 1" mesh. This stand comes apart easily for transport and storage. Assembly time is approximately 2 minutes with no tools required.
The stand is set on a plastic base with 5 castors.Each panel face is 12" wide by 48" high. The overall height when assembled is 1680mm. A metal base can be ordered seperately if preferred
A counter mesh stand for use with our backplate hooks or our economy 1" wire hooks. A header clip is affixed to the top of the unit to display signage. The overal size is 680mm high, 600mm wide and 265mm deep.
Custom sizes available with a minimum of 10 units
