If you have different sized greetings cards and can't find the right card stand, this is a great solution!
Using our Mesh Stands together with our small or large brackets, you can display any size cards you like.
Simply choose what stand you require and the number of brackets from the drop down lists above.
Alternatively, you can buy the items seperately using the related product links below.
The Mesh Stands:
K89 Double sided rotary stand with 2" mesh and usable sides.
The stand is set on a plastic base with Castors
Panel is 360mm (14.255") wide by 1225mm (47.5") high by 55mm (2.25") deep.
Assembled height: 1705mm (67") high.
There is a larger model (K89B) which is 460mm (18.25") wide
K28 Four sided rotary stand with 1" x 1" mesh and plastic base with castors.
Panel size 1235mm (h) x 320mm (w)
Assembled size: 1830mm (h) x 370mm (w) x 370mm (d)
K27 Five sided rotary mesh stand with 2" x 1" mesh and plastic base with castors.
Panel size: 1065mm (h) x 205mm (w)
Assembled size: 1620mm (h) x 315mm (w) x 315mm (d)
The Pocket Brackets:
Pair of pocket brackets, fully adjustable to fit any size literature on your Grid or Mesh Display.
Hooks to grid or mesh with back mounted fitting. Unfinished steel.
Two sizes available.
Small (Q66) - Height: 3.85"/97mm | Width: 1.5"/36mm | Depth: 1.5"/36mm (not including hook)
Pocket depth: 1"/22mm (measured at base)
Large (Q67) - Height: 3.9"/98mm | Width: 1.5"/36mm | Depth: 2"/52mm (not including hook)
Pocket depth: 1.9"/46mm (measured at base)